Knockdown Sawhorse
Directions
- 1Cut the wooden beams to 850 mm (33.5 inches) in length.
- 2Cut a groove on the top of the beams at 20°.
- 3Cut the wooden board to size.
- 4Cut the beams at a 45° angle 13 mm (0.51181102 Inches)
- 5Attach the hinges to the wooden beams along the 45° cut.
- 6Attach the wooden board to the beams 750mm apart and 70 mm down.
- 7Attach the small wooden pieces to the beams.
- 8Prepare the cable and attach it to the metal pieces.
- 9Attach the metal pieces to the beams using the cable.
- 10Cut the beams at an angle to create a notch.
- 11Attach the beams to the wooden board.
Ingredients
- 4 wooden beams
- 1 3/4" x 2 feet, 11.4 inches. x 3.4 inches wooden board (900mm x 86mm)
- 2 hinges
- 2 cable
- 4 metal piece
Equipment
sawclamppencilmeasuring toolsquaredrillscrewsplierscable