# Natural Soap

The video shows how to make a 100% natural soap.

- Language: en

## Ingredients

- 770 g coconut oil
- 85 g cocoa butter
- 240 g filtered water
- 120 g sodium hydroxide
- natural indigo powder
- 30 g Rosemary essential oil
- 437 g sea salt

## Instructions

1. Throw in 770g of coconut oil to a pot and weigh it with a digital scale.
2. Throw in 85g of cocoa butter.
3. Weigh out your filtered water to add your sodium hydroxide to. Use 240g of filtered water and 120g of sodium hydroxide.
4. Melt the oils and let cool.
5. Add natural indigo powder to this soap and disperse it straight into the oil.
6. Add the water solution to your oils and mix that until it starts to thicken up just a tiny bit.
7. Add in rosemary essential oil. About 30g.
8. Add in 437g of sea salt.
9. Mix the salt completely in the soap.
10. Pour the soap in the mold.
11. Let it sit in the mold for about 2 to 3 hours.
12. Cut your sea salts up.
13. Let it cure for about a month.

## Equipment

- digital scale
- pot
- measuring cup
- whisk
- spoon
- immersion blender
- mold
- cutter

## Tips

- Use a digital scale to be as accurate as possible.
- Make sure to check out the YouTube channel to learn more about soap making.
- Don't miss your window to cut your sea salts up or it will get too hard and it will start to crumble.
- There is A LOT more info to soap making. PLEASE do your research on lye safety before attempting to make soap. lye is caustic and can make you go blind. Also, there is lots other bits of helpful information to soapmaking. A short tik tok does not do it justice!

## Source

- Original video: https://www.facebook.com/share/v/18tiueySwH/
- Recipe page: https://www.cliprecipe.com/recipe/4ac4fd46-7841-4725-b9f4-ccc9a743ae0c
- Extracted: 2025-06-17

Extracted from the video by Clip Recipe (https://www.cliprecipe.com). Quantities and steps are as stated or shown in the video. Site guide for agents: https://www.cliprecipe.com/llms.txt