# Knockdown Sawhorse

Build a knockdown sawhorse.

- Servings: 1 servings
- Total time: 1 min
- Language: en

## Ingredients

- 4 wooden beams
- 1 3/4" x 2 feet, 11.4 inches. x 3.4 inches wooden board (900mm x 86mm)
- 2 hinges
- 2 cable
- 4 metal piece

## Instructions

1. Cut the wooden beams to 850 mm (33.5 inches) in length.
2. Cut a groove on the top of the beams at 20°.
3. Cut the wooden board to size.
4. Cut the beams at a 45° angle 13 mm (0.51181102 Inches)
5. Attach the hinges to the wooden beams along the 45° cut.
6. Attach the wooden board to the beams 750mm apart and 70 mm down.
7. Attach the small wooden pieces to the beams.
8. Prepare the cable and attach it to the metal pieces.
9. Attach the metal pieces to the beams using the cable.
10. Cut the beams at an angle to create a notch.
11. Attach the beams to the wooden board.

## Equipment

- saw
- clamp
- pencil
- measuring tool
- square
- drill
- screws
- pliers
- cable

## Source

- Original video: https://www.facebook.com/reel/544957051923525
- Recipe page: https://www.cliprecipe.com/recipe/0470c631-1d38-4b4d-b430-34267a92c7f9
- Extracted: 2025-02-10

Extracted from the video by Clip Recipe (https://www.cliprecipe.com). Quantities and steps are as stated or shown in the video. Site guide for agents: https://www.cliprecipe.com/llms.txt